faultless and comparable analysis is closely linked to an accurate sample handling. Only a sample representative of the initial material can provide meaningful analysis results. Sample splitters ensure the representativeness of a sample and thus the reproducibility of the analysis.

The RT 100 XL is equipped with a feed hopper with closed outlet. Thus, up to 30 l sample material may be evenly spread over the entire width of the hopper. The outlet is opened manually by moving a lever and the sample is splitted. The slots of the dividing head can be adjusted to a maximum width of 108 mm.

The sample splitters RT are ideal for the on-site reduction of sample material. They are easy to use, easy to clean and do not need an electrical power supply.

應用實例

化學制品, 咖啡, 土壤, 堅果, 填充物, 建筑原料, 水泥熔渣, 沙子, 洗衣粉, 礦物, 種子, 肥料, 谷物, 金屬粉末, 面粉, ...

優點

• 實驗室與現場均可使用

• 高度精確的人工分樣工藝

• optimized splitting process by evenly spreading the sample over the hopper

• variable slot widths permit splitting of coarse bulk material

• 分樣工藝根據DIN 51701

性能指標

Please note:
受樣品材料性質和儀器配置/設定的影響

作用原理

With sample splitters, one of the receptacles is used to pour a well  mixed sample evenly into the dividing head. The material runs through the alternately arranged passages in the opposite direction into the two  collecting receptacles under the dividing head outlets. With every operation the feed sample is halved. This can be repeated as many times  as necessary until the required dividing quantity has been obtained.

根據技術改造和誤差調整