本圖使用氧化鋯0.6mm研磨珠，每秒11米速度，連續運行8500小時打開機器情況，無磨損、無銹蝕、無變形，產品質量符合指標要求。

            本公司生產的超耐磨不銹合金鋼研磨內筒：采用優質不銹合金鋼，經先進工藝精制而成，適用于金屬、非金屬礦、高溫重油及化工鈦白粉等物料的研磨作業。產品具備使用壽命長、超強耐磨、耐腐蝕性佳等特點，且不會對物料造成污染，使用成本優勢顯著。

            可生產及更換500升、1000升至5000升容積的國內外砂磨機研磨內筒，支持內外研磨筒整體交付，也可單獨更換研磨內筒（單獨更換需在供方生產場地進行）。

            目前，我公司的不銹合金鋼超耐磨研磨內筒已成功應用于鈦白粉（Tio?）研磨場景，搭配0.6-0.8mm氧化鋯95研磨介質，在11m/s線速度下運行，設計使用壽命可達10年以上。現有案例中，同款產品經5年實際生產運行后無明顯磨損，廣受用戶認可，歡迎預約前往用戶使用現場實地考察。

The super wear-resistant stainless alloy steel grinding inner cylinder produced by our company: It is made of high-quality stainless alloy steel through advanced craftsmanship, and is suitable for grinding operations of materials such as metals, non-metallic minerals, high-temperature heavy oil, and chemical titanium dioxide. The product features long service life, super wear resistance, and excellent corrosion resistance. It will not pollute materials and has significant advantages in terms of usage cost.

We can produce and replace grinding inner cylinders of sand mills at home and abroad with volumes ranging from 500 liters, 1000 liters to 5000 liters. We support the overall delivery of inner and outer grinding cylinders, and can also replace the grinding inner cylinder separately (separate replacement needs to be carried out at the supplier's production site).

At present, our company's super wear-resistant stainless alloy steel grinding inner cylinder has been successfully applied in titanium dioxide (TiO?) grinding scenarios. Equipped with 0.6-0.8mm zirconia 95 grinding media and operating at a linear speed of 11m/s, its designed service life can reach more than 10 years. In existing cases, the same product shows no obvious wear after 5 years of actual production operation, which is widely recognized by users. You are welcome to make an appointment to visit the user's application site for on-site inspection.