Application

Furnaces are used in laboratories for heat-treatment testing of various samples, when the agresive fouling, which would pelt with the spirals, can be formed.

Description of the construction of the furnace:
- frameless conctruction created by the hooped rustless metal plate,
- portal of the door of the fireproof adapting pieces,
- in the peep-hole of the door the protective blue glass,
- door of the hooped rustless metal plate tank shaped ,
- thrust is extrapolated by the ductile springs,
- muffle insulated by the sedge of the mineral grain and cased by the insulation desks,
- door fulfilmed by the insulation desk,
- heating spiral winding-up on the muffle,
- door equiped by the security limit switch,
- feeder cables procurated by the uniphase bolts,
- furnace equiped by the cooling fan,
- controller HT 40AL enables controlling to standard value,
- thermocouple of the type S, placed on the back side
 
Standard equipment of the furnace covers:

- controller HT 40AL
- manualy door opening up

Like an accessories as an extra we are bidding:

-  controller INDUSTRY
-  rotary table
-  interface R 232/485
-  exhaust fan
-  software for the monitoring and the record of the temperature cycle
-  protective atmospher supply
-  calibration of the entry of the measuring controller

Benefits:

-  rustless fulfilment
-  attractive design
-  draught prevenes the devaporation of the vapours at firing and markedly opprobrious the temperature of the mantle
-  perfect lay of the temperature
-  top insulating materials ( low power consumption, possibility of the fast start on the asked temperature )
-  programmable temperature adjustment with the high accuracy
-  solid state relay (more fluent and silent running,the minimum disturbance of the surrounding mechanism )
-  perfect workshop processing,the hardware and safety in service

應用范圍：

熔爐被用于實驗室不同樣品的熱處理的測試，并能有效的阻止電熱元件在加熱過程中受到腐蝕物質的污染。
 
結構描述：

-   爐殼采用優質花紋不銹鋼制成
-   電爐入口安裝有防火模塊
-   門上安裝觀察孔
-   彈簧助推式上開門
-   門由氧化鋁纖維整體模塊組成
-   電熱絲環繞在馬夫爐膛的四周
-   門上安裝有斷電開關
-   單相的供電電纜
-   電控元件通過電子風扇降溫
-   控制器HT40AL 有2個升溫段，2個恒溫段
-   S型熱電偶 

標準設計包括：

-  HT40AL控制器
-  手動的上開門

優點：

-  實現不銹
-  吸引人的設計
-  優良的隔熱保溫效果，防止爐外殼水蒸汽凝結
-  頂部絕緣材料( 低功率消耗, 在被要求的溫度上快速開始的可能性)
-  可編程的高精確度的溫度控制
-  固態繼電器SSR (流暢和無聲的運轉, 周圍機械裝置的*小干擾)
-  **的車間操作， 硬件和使用中的安全設備

額外收費附件：

-  控制器工業
-  界面R 232/485
-  排氣風扇
-  監控軟件和溫度循環的記錄
-  氣體保護裝置